Training Course:

Industrial Telescopic Materials Handler

Category:

Fork Lift Truck

Duration:

Basic Operators (Novice):
5 Days – Max. 3 candidates 4 Days – Max. 2 candidates 3 Days – Max. 1
Candidate Refresher Course: 1 Day – Max. 3 candidates

Course Aim

On completion of training the course members will:

  • be able to operate the truck model used during training safely and correctly in accordance with the manufacturer's handbook and accepted good practice
  • clearly understand the causes of instability of trucks and loads
  • be able to carry out a routine pre-use inspection of the truck

Course Contents

  • Introduction to the lift truck
  • Controls and instruments
  • Starting, moving and stopping the truck
  • Steering the truck
  • Operation of hydraulic controls
  • Pre-use inspection
  • Weight assessment
  • Handling laden and unladen pallets
  • Driving on/off ramps and inclines
  • Driving and operating over uneven terrain
  • Lorry loading and unloading
  • Stacking/de-stacking - freestanding and in racking
  • Operators safety code
  • Lift truck stability

Certification and Validation

Candidates successfully completing this course will receive a certificate of training accredited with RTITB or AITT

Other Courses

All

Category: 

IPAF

Duration: 

1 day - Max 6 Candidates, Stand alone course

Course Aim:

This industry leading course will provide delegates with the knowledge and practical skills to safely operate powered access equipment. This IPAF Operator course with practical training session and assessment covers only the Static Boom (1b).

Category: 

Plant Machinery

Duration: 

Basic Operators (Novice): 5 Days – Max. 3 candidates, 4 Days – Max. 2 candidates, 3 Days – Max. 1 Candidate Refresher Course: 1 Day – Max. 3 candidates

Course Aim:

Excavator training can take place at our Kings Lynn training centre, on your site using your equipment. We can offer courses for above and below 10 tonnes

Category: 

IPAF

Duration: 

1 Full Day

Course Aim:

The IPAF 3a and 3b Training Course instructs an operator to prepare and operate various types of Mobile Elevating Work Platforms (MEWPs) including cherry pickers, scissor lifts, and mobile booms such as articulated & electric boom lifts.

Category: 

Plant Machinery

Duration: 

1 day for up to 5 people on a novice or refresher course

Course Aim:

On completion of training the course members will be able to safely and clearly guide drivers of commercial goods vehicles into designated parking areas, Be able to evaluate risks in the local environment and recognise evolving and existing hazards, Be able to discuss the role of the banksman and their responsibilities.

Category: 

Plant Machinery

Duration: 

Basic Operators (Novice) 2 Days – Max. 3 candidates 1 Day – Max. 1 candidate Or Refresher Course

Course Aim:

This course is designed to show operators the safe and efficient operation of a forward tipping dumper truck. Trainees will learn the skills and techniques to operating a dumper truck on site.

Category: 

Plant Machinery

Duration: 

Basic Operators (Novice): 4 Days – Max. 3 candidates, 4 Days – Max. 2 candidates 3 Days – Max. 2 Candidate Refresher Course: 1 Day – Max. 3 candidates

Course Aim:

This course is designed to show operators the safe and efficient operation of a Wheeled loading shovel. Trainees will learn the skills and techniques to operating a wheeled loading shovel on site.

Category: 

IPAF

Duration: 

Half Day

Course Aim:

IPAF accredited course designed for any operator, supervisor or manager required to select, pre-use check, adjust and inspect harnesses and lanyards.

Category: 

Fork Lift Truck

Duration: 

Basic Operators (Novice): 5 Days – Max. 3 candidates 4 Days – Max. 2 candidates 3 Days – Max. 1 Candidate Refresher Course: 1 Day – Max. 3 candidates

Course Aim:

Be able to operate the truck model used during training safely and correctly in accordance with the manufacturer’s handbook and accepted good practice. Clearly understand the causes of instability of trucks and loads Be able to carry out a routine pre-use inspection of the truck

Category: 

Fork Lift Truck

Duration: 

Basic Operators (Novice): 5 Days – Max. 3 candidates 4 Days – Max. 2 candidates 3 Days – Max. 1 Candidate Refresher Course: 1 Day – Max. 3 candidates

Course Aim:

On completion of training the course members will: be able to operate the truck model used during training safely and correctly in accordance with the manufacturer's handbook and accepted good practice, clearly understand the causes of instability of trucks and loads, be able to carry out a routine pre-use inspection of the truck.

Category: 

Plant Machinery

Duration: 

Basic Operators (Novice): 2 Days – Max. 3 candidates, 1 Day – Max. 1 candidates Candidate Refresher Course: 1 Day – Max. 3 candidates

Course Aim:

Our hydraulic lorry loader course which is commonly referred to as a HIAB will teach trainees how to use lorry loaders in a safe and efficient manner. The lorry loader course is accredited by the RTITB or AITT and the course duration will depend upon the number of trainees attending and their experience levels. Our courses are available on site anywhere in the UK.

Category: 

Fork Lift Truck

Duration: 

Basic Operators (Novice): 5 Days – Max. 3 candidates, 4 Days – Max. 2 candidates, 3 Days – Max. 1 Candidate Refresher Course: 1 Day – Max. 3 candidates

Course Aim:

On completion of training the course members will be able to operate the truck model used during training safely and correctly in accordance with the manufacturer's handbook and accepted good practice, clearly understand the causes of instability of trucks and loads and be able to carry out a routine pre-use inspection of the truck,

Category: 

First AID

Duration: 

1-Day Training Course

Course Aim:

All learners will have the skills and knowledge to provide the organisation with Emergency First Aider’s that can provide treatment to their casualties in a prompt, safe and effective manner.

Category: 

First AID

Duration: 

3- Day Training Course

Course Aim:

It is a requirement of the Health & Safety law that employers provide a safe and healthy environment to work in. If your assessment of first aid needs highlights the need for qualified first aiders, then this level 3 qualification (level 6 in Scotland) will provide you with suitable, highly trained personnel. This comprehensive three-day course covers a wide range of first aid emergencies, enabling all participants to deal with emergency situations with confidence in a prompt, safe and effective way. In addition, this course will include any protocol changes that may have arisen since their last training course.

Category: 

Fork Lift Truck

Duration: 

Basic Operators (Novice): 5 Days – Max. 3 candidates, 4 Days – Max. 2 candidates, 3 Days – Max. 1 Candidate Refresher Course: 1 Day – Max. 3 candidates

Course Aim:

On completion of training the course members will be able to operate the truck model used during training safely and correctly in accordance with the manufacturer’s handbook and accepted good practice, clearly understand the causes of instability of trucks and loads and able to carry out a routine pre-use inspection of the truck.

Category: 

Plant Machinery

Duration: 

Basic Operators (Novice): 2 Days – Max. 3 candidates 1 Days – Max. 2 candidates

Course Aim:

This training is essential for operatives using any form of overhead gantry lifting equipment. The course aims to provide delegates with a thorough understanding of the hazards associated with operating such machinery. This includes having a working knowledge of how the various machines operate and to identify the major components of the machine and explain their functions, including weight limits, and to carry out an effective pre-use check.

Category: 

IPAF

Duration: 

Course Aim:

The term ‘Push Around Verticals’ refers to non-mechanical vertical platforms which are manoeuvred into place by hand, rather than relying on an engine/motor of any kind. These platforms are designed to meet working at height regulations, and provide a low-level access platform for use primarily indoors, which is also much safer than using traditional ladders and steps, not to mention cheaper than scaffolding and powered access platforms. Despite being generally very safe, proper Push Around Verticals training is needed to minimise risks.

Category: 

Fork Lift Truck

Duration: 

Basic Operators (Novice): 5 Days – Max. 3 candidates, 4 Days – Max. 2 candidates, 3 Days – Max. 1 Candidate Refresher Course: 1 Day – Max. 3 candidates

Course Aim:

On completion of training the course members will be able to Operate the Electric Pedestrian Operated Truck model used during the training course, safely and correctly in accordance with the Manufacturers Operator Procedures Manual and accepted good operating practices. Show their understanding, by clearly stating the causes of instability of trucks and loads and carry out correctly the routine pre-use inspection of the truck in accordance with the Manufacturers Operator Procedures Manual.

Category: 

Fork Lift Truck

Duration: 

Basic Operators (Novice): 5 Days – Max. 3 candidates, 4 Days – Max. 2 candidates, 3 Days – Max. 1 Candidate Refresher Course: 1 Day – Max. 3 candidates

Course Aim:

On completion of training the course members will be able to operate the truck model used during training safely and correctly in accordance with the manufacturer's handbook and accepted good practice, clearly understand the causes of instability of trucks and loads and be able to carry out a routine pre-use inspection of the truck

Category: 

Fork Lift Truck

Duration: 

Basic Operators (Novice): 5 Days – Max. 3 candidates, 4 Days – Max. 2 candidates, 3 Days – Max. 1 Candidate Refresher Course: 1 Day – Max. 3 candidates

Course Aim:

Reach trucks were introduced to reduce aisle widths and therefore allow companies to increase the number of aisles and racking spaces available to them. Reach trucks are commonplace in UK industry today.

Category: 

Fork Lift Truck

Duration: 

Basic Operators (Novice): 1 Days – Max. 3 candidates Candidate Refresher Course: 1 Day – Max. 3 candidates

Course Aim:

On completion of training the course members will be able to Operate the Electric Rider Operated Pallet Truck model used during the training course, safely and correctly in accordance with the Manufacturers Operator Procedures Manual and accepted good operating practices. Show their understanding, by clearly stating the causes of instability of trucks and loads. Carry out correctly the routine pre-use inspection of the truck in accordance with the Manufacturers Operator Procedures Manual.

Category: 

Fork Lift Truck

Duration: 

Basic Operators (Novice): 5 Days – Max. 3 candidates, 4 Days – Max. 2 candidates, 3 Days – Max. 1 Candidate Refresher Course: 1 Day – Max. 3 candidates

Course Aim:

The rough terrain counterbalance lift truck is used where ground conditions require a more versatile truck, and telescopic is not required.

Category: 

Fork Lift Truck

Duration: 

Basic Operators (Novice): 5 Days – Max. 3 candidates, 4 Days – Max. 2 candidates, 3 Days – Max. 1 Candidate Refresher Course: 1 Day – Max. 3 candidates

Course Aim:

Often referred to as a telehandler or teleporter, this type of fork lift truck has become much more popular in recent years as its design provides a more versatile alternative to the traditional masted counterbalance truck (standard and rough terrain).

Category: 

Instructor

Duration: 

Novice – 10 days or 12 days extended, Direct Entry 5 days, Refresher – 5 days or 3 days for practicing instructors.

Course Aim:

For experienced Lift Truck Operators who wish to progress to becoming an Instructor. A minimum of 6 months industrial operating is required and documentary evidence, is also required, of passing the Practical Test(s) of Operating Skills endorsed by RTITB Limited, within the 12 months preceding the course start date.

Category: 

Fork Lift Truck

Duration: 

Basic Operators (Novice): 5 Days – Max. 3 candidates, 4 Days – Max. 2 candidates, 3 Days – Max. 1 Candidate Refresher Course: 1 Day – Max. 3 candidates

Course Aim:

On completion of training the course members will be able to operate the truck model used during training safely and correctly in accordance with the manufacturer's handbook and accepted good practice, clearly understand the causes of instability of trucks and loads and be able to carry out a routine pre-use inspection of the truck.

Category: 

Plant Machinery

Duration: 

Course Aim:

This course is designed to show operators the safe and efficient operation of a forward Skid Steer Loading Shovel. Trainees will learn the skills and techniques to operating a Skid Steer Loading Shovel on site.

Category: 

Plant Machinery

Duration: 

Basic Operators (Novice): 5 Days – Max. 3 candidates, 4 Days – Max. 2 candidates, 3 Days – Max. 1 Candidate Refresher Course: 1 Day – Max. 3 candidates

Course Aim:

This training is essential for those people involved in lifting and moving loads using a crane. Trainees will be shown slinging techniques and taught how to make sure loads are safely secured prior to lifting and moving them.

Category: 

Fork Lift Truck

Duration: 

Basic Operators (Novice): 5 Days – Max. 3 candidates, 4 Days – Max. 2 candidates, 3 Days – Max. 1 Candidate Refresher Course: 1 Day – Max. 3 candidates

Course Aim:

We are pleased to announce that the Moffett course is now available to private individuals at our Kings Lynn, Norfolk training centre. Drivers who hold an LGV licence can expand their skills by acquiring a Vehicle Mounted Forklift Certificate, commonly known as a Moffett Mounty. This qualification enables drivers to carry a forklift attached to the rear of their truck which enables them to load and unload themselves. If you already hold a forklift certificate, a conversion course is 2 days to gain the additional knowledge and skills.

Category: 

Fork Lift Truck

Duration: 

Basic Operators (Novice): 5 Days – Max. 3 candidates 4 Days – Max. 2 candidates 3 Days – Max. 1 Candidate Refresher Course: 1 Day – Max. 3 candidates

Course Aim:

On completion of training the course members will: • be able to operate the truck model used during training safely and correctly in accordance with the manufacturer's handbook and accepted good practice • clearly understand the causes of instability of trucks and loads • be able to carry out a routine pre-use inspection of the truck

First AID

Category: 

First AID

Duration: 

1-Day Training Course

Course Aim:

All learners will have the skills and knowledge to provide the organisation with Emergency First Aider’s that can provide treatment to their casualties in a prompt, safe and effective manner.

Category: 

First AID

Duration: 

3- Day Training Course

Course Aim:

It is a requirement of the Health & Safety law that employers provide a safe and healthy environment to work in. If your assessment of first aid needs highlights the need for qualified first aiders, then this level 3 qualification (level 6 in Scotland) will provide you with suitable, highly trained personnel. This comprehensive three-day course covers a wide range of first aid emergencies, enabling all participants to deal with emergency situations with confidence in a prompt, safe and effective way. In addition, this course will include any protocol changes that may have arisen since their last training course.

Fork Lift Truck

Category: 

Fork Lift Truck

Duration: 

Basic Operators (Novice): 5 Days – Max. 3 candidates 4 Days – Max. 2 candidates 3 Days – Max. 1 Candidate Refresher Course: 1 Day – Max. 3 candidates

Course Aim:

Be able to operate the truck model used during training safely and correctly in accordance with the manufacturer’s handbook and accepted good practice. Clearly understand the causes of instability of trucks and loads Be able to carry out a routine pre-use inspection of the truck

Category: 

Fork Lift Truck

Duration: 

Basic Operators (Novice): 5 Days – Max. 3 candidates 4 Days – Max. 2 candidates 3 Days – Max. 1 Candidate Refresher Course: 1 Day – Max. 3 candidates

Course Aim:

On completion of training the course members will: be able to operate the truck model used during training safely and correctly in accordance with the manufacturer's handbook and accepted good practice, clearly understand the causes of instability of trucks and loads, be able to carry out a routine pre-use inspection of the truck.

Category: 

Fork Lift Truck

Duration: 

Basic Operators (Novice): 5 Days – Max. 3 candidates, 4 Days – Max. 2 candidates, 3 Days – Max. 1 Candidate Refresher Course: 1 Day – Max. 3 candidates

Course Aim:

On completion of training the course members will be able to operate the truck model used during training safely and correctly in accordance with the manufacturer's handbook and accepted good practice, clearly understand the causes of instability of trucks and loads and be able to carry out a routine pre-use inspection of the truck,

Category: 

Fork Lift Truck

Duration: 

Basic Operators (Novice): 5 Days – Max. 3 candidates, 4 Days – Max. 2 candidates, 3 Days – Max. 1 Candidate Refresher Course: 1 Day – Max. 3 candidates

Course Aim:

On completion of training the course members will be able to operate the truck model used during training safely and correctly in accordance with the manufacturer’s handbook and accepted good practice, clearly understand the causes of instability of trucks and loads and able to carry out a routine pre-use inspection of the truck.

Category: 

Fork Lift Truck

Duration: 

Basic Operators (Novice): 5 Days – Max. 3 candidates, 4 Days – Max. 2 candidates, 3 Days – Max. 1 Candidate Refresher Course: 1 Day – Max. 3 candidates

Course Aim:

On completion of training the course members will be able to Operate the Electric Pedestrian Operated Truck model used during the training course, safely and correctly in accordance with the Manufacturers Operator Procedures Manual and accepted good operating practices. Show their understanding, by clearly stating the causes of instability of trucks and loads and carry out correctly the routine pre-use inspection of the truck in accordance with the Manufacturers Operator Procedures Manual.

Category: 

Fork Lift Truck

Duration: 

Basic Operators (Novice): 5 Days – Max. 3 candidates, 4 Days – Max. 2 candidates, 3 Days – Max. 1 Candidate Refresher Course: 1 Day – Max. 3 candidates

Course Aim:

On completion of training the course members will be able to operate the truck model used during training safely and correctly in accordance with the manufacturer's handbook and accepted good practice, clearly understand the causes of instability of trucks and loads and be able to carry out a routine pre-use inspection of the truck

Category: 

Fork Lift Truck

Duration: 

Basic Operators (Novice): 5 Days – Max. 3 candidates, 4 Days – Max. 2 candidates, 3 Days – Max. 1 Candidate Refresher Course: 1 Day – Max. 3 candidates

Course Aim:

Reach trucks were introduced to reduce aisle widths and therefore allow companies to increase the number of aisles and racking spaces available to them. Reach trucks are commonplace in UK industry today.

Category: 

Fork Lift Truck

Duration: 

Basic Operators (Novice): 1 Days – Max. 3 candidates Candidate Refresher Course: 1 Day – Max. 3 candidates

Course Aim:

On completion of training the course members will be able to Operate the Electric Rider Operated Pallet Truck model used during the training course, safely and correctly in accordance with the Manufacturers Operator Procedures Manual and accepted good operating practices. Show their understanding, by clearly stating the causes of instability of trucks and loads. Carry out correctly the routine pre-use inspection of the truck in accordance with the Manufacturers Operator Procedures Manual.

Category: 

Fork Lift Truck

Duration: 

Basic Operators (Novice): 5 Days – Max. 3 candidates, 4 Days – Max. 2 candidates, 3 Days – Max. 1 Candidate Refresher Course: 1 Day – Max. 3 candidates

Course Aim:

The rough terrain counterbalance lift truck is used where ground conditions require a more versatile truck, and telescopic is not required.

Category: 

Fork Lift Truck

Duration: 

Basic Operators (Novice): 5 Days – Max. 3 candidates, 4 Days – Max. 2 candidates, 3 Days – Max. 1 Candidate Refresher Course: 1 Day – Max. 3 candidates

Course Aim:

Often referred to as a telehandler or teleporter, this type of fork lift truck has become much more popular in recent years as its design provides a more versatile alternative to the traditional masted counterbalance truck (standard and rough terrain).

Category: 

Fork Lift Truck

Duration: 

Basic Operators (Novice): 5 Days – Max. 3 candidates, 4 Days – Max. 2 candidates, 3 Days – Max. 1 Candidate Refresher Course: 1 Day – Max. 3 candidates

Course Aim:

On completion of training the course members will be able to operate the truck model used during training safely and correctly in accordance with the manufacturer's handbook and accepted good practice, clearly understand the causes of instability of trucks and loads and be able to carry out a routine pre-use inspection of the truck.

Category: 

Fork Lift Truck

Duration: 

Basic Operators (Novice): 5 Days – Max. 3 candidates, 4 Days – Max. 2 candidates, 3 Days – Max. 1 Candidate Refresher Course: 1 Day – Max. 3 candidates

Course Aim:

We are pleased to announce that the Moffett course is now available to private individuals at our Kings Lynn, Norfolk training centre. Drivers who hold an LGV licence can expand their skills by acquiring a Vehicle Mounted Forklift Certificate, commonly known as a Moffett Mounty. This qualification enables drivers to carry a forklift attached to the rear of their truck which enables them to load and unload themselves. If you already hold a forklift certificate, a conversion course is 2 days to gain the additional knowledge and skills.

Category: 

Fork Lift Truck

Duration: 

Basic Operators (Novice): 5 Days – Max. 3 candidates 4 Days – Max. 2 candidates 3 Days – Max. 1 Candidate Refresher Course: 1 Day – Max. 3 candidates

Course Aim:

On completion of training the course members will: • be able to operate the truck model used during training safely and correctly in accordance with the manufacturer's handbook and accepted good practice • clearly understand the causes of instability of trucks and loads • be able to carry out a routine pre-use inspection of the truck

Instructor

Category: 

Instructor

Duration: 

Novice – 10 days or 12 days extended, Direct Entry 5 days, Refresher – 5 days or 3 days for practicing instructors.

Course Aim:

For experienced Lift Truck Operators who wish to progress to becoming an Instructor. A minimum of 6 months industrial operating is required and documentary evidence, is also required, of passing the Practical Test(s) of Operating Skills endorsed by RTITB Limited, within the 12 months preceding the course start date.

IPAF

Category: 

IPAF

Duration: 

1 day - Max 6 Candidates, Stand alone course

Course Aim:

This industry leading course will provide delegates with the knowledge and practical skills to safely operate powered access equipment. This IPAF Operator course with practical training session and assessment covers only the Static Boom (1b).

Category: 

IPAF

Duration: 

1 Full Day

Course Aim:

The IPAF 3a and 3b Training Course instructs an operator to prepare and operate various types of Mobile Elevating Work Platforms (MEWPs) including cherry pickers, scissor lifts, and mobile booms such as articulated & electric boom lifts.

Category: 

IPAF

Duration: 

Half Day

Course Aim:

IPAF accredited course designed for any operator, supervisor or manager required to select, pre-use check, adjust and inspect harnesses and lanyards.

Category: 

IPAF

Duration: 

Course Aim:

The term ‘Push Around Verticals’ refers to non-mechanical vertical platforms which are manoeuvred into place by hand, rather than relying on an engine/motor of any kind. These platforms are designed to meet working at height regulations, and provide a low-level access platform for use primarily indoors, which is also much safer than using traditional ladders and steps, not to mention cheaper than scaffolding and powered access platforms. Despite being generally very safe, proper Push Around Verticals training is needed to minimise risks.

Plant Machinery

Category: 

Plant Machinery

Duration: 

Basic Operators (Novice): 5 Days – Max. 3 candidates, 4 Days – Max. 2 candidates, 3 Days – Max. 1 Candidate Refresher Course: 1 Day – Max. 3 candidates

Course Aim:

Excavator training can take place at our Kings Lynn training centre, on your site using your equipment. We can offer courses for above and below 10 tonnes

Category: 

Plant Machinery

Duration: 

1 day for up to 5 people on a novice or refresher course

Course Aim:

On completion of training the course members will be able to safely and clearly guide drivers of commercial goods vehicles into designated parking areas, Be able to evaluate risks in the local environment and recognise evolving and existing hazards, Be able to discuss the role of the banksman and their responsibilities.

Category: 

Plant Machinery

Duration: 

Basic Operators (Novice) 2 Days – Max. 3 candidates 1 Day – Max. 1 candidate Or Refresher Course

Course Aim:

This course is designed to show operators the safe and efficient operation of a forward tipping dumper truck. Trainees will learn the skills and techniques to operating a dumper truck on site.

Category: 

Plant Machinery

Duration: 

Basic Operators (Novice): 4 Days – Max. 3 candidates, 4 Days – Max. 2 candidates 3 Days – Max. 2 Candidate Refresher Course: 1 Day – Max. 3 candidates

Course Aim:

This course is designed to show operators the safe and efficient operation of a Wheeled loading shovel. Trainees will learn the skills and techniques to operating a wheeled loading shovel on site.

Category: 

Plant Machinery

Duration: 

Basic Operators (Novice): 2 Days – Max. 3 candidates, 1 Day – Max. 1 candidates Candidate Refresher Course: 1 Day – Max. 3 candidates

Course Aim:

Our hydraulic lorry loader course which is commonly referred to as a HIAB will teach trainees how to use lorry loaders in a safe and efficient manner. The lorry loader course is accredited by the RTITB or AITT and the course duration will depend upon the number of trainees attending and their experience levels. Our courses are available on site anywhere in the UK.

Category: 

Plant Machinery

Duration: 

Basic Operators (Novice): 2 Days – Max. 3 candidates 1 Days – Max. 2 candidates

Course Aim:

This training is essential for operatives using any form of overhead gantry lifting equipment. The course aims to provide delegates with a thorough understanding of the hazards associated with operating such machinery. This includes having a working knowledge of how the various machines operate and to identify the major components of the machine and explain their functions, including weight limits, and to carry out an effective pre-use check.

Category: 

Plant Machinery

Duration: 

Course Aim:

This course is designed to show operators the safe and efficient operation of a forward Skid Steer Loading Shovel. Trainees will learn the skills and techniques to operating a Skid Steer Loading Shovel on site.

Category: 

Plant Machinery

Duration: 

Basic Operators (Novice): 5 Days – Max. 3 candidates, 4 Days – Max. 2 candidates, 3 Days – Max. 1 Candidate Refresher Course: 1 Day – Max. 3 candidates

Course Aim:

This training is essential for those people involved in lifting and moving loads using a crane. Trainees will be shown slinging techniques and taught how to make sure loads are safely secured prior to lifting and moving them.